Back to the main page Back to category Electric Scooters
watch details
E-Glide Aluminum A/T Electric Skateboard BUILT IN USA
Estimated price for orientation: 1 229 $
Category: Electric Scooters
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: E-Glide MPN: Does Not Apply Wattage: 800 Country/Region of Manufacture: United States Model: All Terrain UPC: Does not apply
E-GLIDE ALUMINUM A/T OFF ROAD POWERBOARD (All Terrain) BUILT IN THE U.S.
One Year Warranty on our European Electronics
E-Glide has been building, servicing, and shipping custom powerboards for over ten years. Our powerboards are built one at a time in our Santa Monica, CA shop.
Our Aluminum A/T has been in production for four years, and is the most powerful electric skateboard offered commercially. This powerboard will go up or over anything! We have guys riding these through Africa, going up hills of snow with chains in Sweden. These are the only powerboards that survive Burning Man. Check out the videos below. ELECTRONICS The enormous power that the AT generates is a result of our European “industrial grade” electronics manufactured for us by PG Drives Technologies, mated to a high output 800 watt, 36 volt motor. The motor controller kicks out 70 amps of power. These are the most powerful and reliable motor controllers (electronics) ever offered on an electric skateboard. They are so reliable they come with a full, non- pro rated, one year warranty. No other electric skateboard offers electronics as powerful, as proven, of this quality, or with this kind of warranty! The result is a powerboard with the fastest acceleration, 0-24 mph in four seconds, highest torque, and highest top speed of any electric skateboard offered today. BRAKING Powerful regenerative braking will stop you quickly.
Stealthy quiet with belt drive, this machine is not for the squeamish. We had to fit a high/low switch on it, and most will never ride it on "high power". ALUMINUM DECK/BATTERY BOX The AT deck is made from .25 inch thick 6061 US made plate aluminum. Each deck is laser cut and perfect concave is added by hydraulic pressing. Edges are radiused. The large fourteen inch wide deck provides a large platform for taller riders to move around on. The unitized effect of the aluminum deck/battery box provides a much “tighter” feel, there is no flex, nor deck “noise” generated. The all aluminum AT will provide you with many years of reliable service. TIRES The AT comes equipped with massive Kenda 10 inch pneumatic slicks. These tires have been used for years on GoPed racing scooters, and provide an amazingly smooth ride and have excellent handling characteristics. They can be used on dirt, gravel, hard packed sand, concrete or asphalt. BATTERIES We now use a special Electric Vehicle battery on all AT’s This is a high output, long life, SLA battery manufactured for us by B & B Battery company. These units, often used in golf carts, will provide an honest 15 mile plus range on flats, and will last for years if maintained. They are the most reliable battery we have experienced in ten years of building powerboards. They are much more reliable than any lithium we have used. CUSTOMER SERVICE Distributed wordwide, we have been building powerboards, full time, for over ten years, and have earned the reputation for being a world leader in electric skateboard design and fabrication. We have a full production shop in Santa Monica, CA. We are ALWAYS open M-F 9-5 PST, and can ALWAYS be reached by phone during business hours. We have the largest electric skateboard parts inventory in the US. Our customer service is legendary. Simplicity of construction combined with the highest quality components make E-Glides the most reliable powerboards offered anywhere today, with the longest warranty. TECHNICAL SPECIFICATIONS 0-24 MPH in five second performance!ALUMINUM DECK 6061 US Made aluminum, .25 inches thick 46.5” length/14.5 “widthWHEEL BASE is 17 inchHEIGHT is 9 inches from ground to top of deckWEIGHT is 75 poundsSTATE OF THE ART "Industrial" grade European electronics, manufactured by PG Drive Technologies, provides and insures the most advanced, trouble free, and reliable electronics of any electric skateboard produced by anyone in the world todaylEXTRA POWERFUL regenerative braking and controlled RPM downhill ridingBATTERIES are 12 volt / 12 amp B & B Battery EB Series (electrical vehicle batteries)UNCONDITIONAL one year warranty on electronics/six months on everything else15 MILE PLUS range on flatsTIRES10 inch Kenda Hi Performance Slicks UNREAL POWER, torque and speedHIGH/LOW SWITCH . INTERNATIONAL CUSTOMERS ATTENTION! We ship Internationally by Fedex International Economy. Ebay only allows us one shipping cost option for International shipments, every country is different, roughly 275.00 to Western Europe, 350.00 to Australia, etc. If you want us to ship Internationally, contact us first so we can provide you with an accurate shipping cost. We charge exactly what Fedex charges us, based on a 40% corporate discount rate. Check out the A/T video: http://www.youtube.com/watch?v=R6IPwp6AY3g&feature=youtu.beFeel free to contact us should you have further questions, we are always in the shop M-F 9-5 PST.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | E-Glide |
| MPN: | Does Not Apply | Wattage: | 800 |
| Country/Region of Manufacture: | United States | Model: | All Terrain |
| UPC: | Does not apply |
E-GLIDE ALUMINUM A/T OFF ROAD POWERBOARD (All Terrain) BUILT IN THE U.S.
One Year Warranty on our European Electronics
E-Glide has been building, servicing, and shipping custom powerboards for over ten years. Our powerboards are built one at a time in our Santa Monica, CA shop.
Our Aluminum A/T has been in production for four years, and is the most powerful electric skateboard offered commercially. This powerboard will go up or over anything! We have guys riding these through Africa, going up hills of snow with chains in Sweden. These are the only powerboards that survive Burning Man. Check out the videos below. ELECTRONICS The enormous power that the AT generates is a result of our European “industrial grade” electronics manufactured for us by PG Drives Technologies, mated to a high output 800 watt, 36 volt motor. The motor controller kicks out 70 amps of power. These are the most powerful and reliable motor controllers (electronics) ever offered on an electric skateboard. They are so reliable they come with a full, non- pro rated, one year warranty. No other electric skateboard offers electronics as powerful, as proven, of this quality, or with this kind of warranty! The result is a powerboard with the fastest acceleration, 0-24 mph in four seconds, highest torque, and highest top speed of any electric skateboard offered today. BRAKING Powerful regenerative braking will stop you quickly.
Stealthy quiet with belt drive, this machine is not for the squeamish. We had to fit a high/low switch on it, and most will never ride it on "high power". ALUMINUM DECK/BATTERY BOX The AT deck is made from .25 inch thick 6061 US made plate aluminum. Each deck is laser cut and perfect concave is added by hydraulic pressing. Edges are radiused. The large fourteen inch wide deck provides a large platform for taller riders to move around on. The unitized effect of the aluminum deck/battery box provides a much “tighter” feel, there is no flex, nor deck “noise” generated. The all aluminum AT will provide you with many years of reliable service. TIRES The AT comes equipped with massive Kenda 10 inch pneumatic slicks. These tires have been used for years on GoPed racing scooters, and provide an amazingly smooth ride and have excellent handling characteristics. They can be used on dirt, gravel, hard packed sand, concrete or asphalt. BATTERIES We now use a special Electric Vehicle battery on all AT’s This is a high output, long life, SLA battery manufactured for us by B & B Battery company. These units, often used in golf carts, will provide an honest 15 mile plus range on flats, and will last for years if maintained. They are the most reliable battery we have experienced in ten years of building powerboards. They are much more reliable than any lithium we have used. CUSTOMER SERVICE Distributed wordwide, we have been building powerboards, full time, for over ten years, and have earned the reputation for being a world leader in electric skateboard design and fabrication. We have a full production shop in Santa Monica, CA. We are ALWAYS open M-F 9-5 PST, and can ALWAYS be reached by phone during business hours. We have the largest electric skateboard parts inventory in the US. Our customer service is legendary. Simplicity of construction combined with the highest quality components make E-Glides the most reliable powerboards offered anywhere today, with the longest warranty. TECHNICAL SPECIFICATIONS 0-24 MPH in five second performance!ALUMINUM DECK 6061 US Made aluminum, .25 inches thick 46.5” length/14.5 “widthWHEEL BASE is 17 inchHEIGHT is 9 inches from ground to top of deckWEIGHT is 75 poundsSTATE OF THE ART "Industrial" grade European electronics, manufactured by PG Drive Technologies, provides and insures the most advanced, trouble free, and reliable electronics of any electric skateboard produced by anyone in the world todaylEXTRA POWERFUL regenerative braking and controlled RPM downhill ridingBATTERIES are 12 volt / 12 amp B & B Battery EB Series (electrical vehicle batteries)UNCONDITIONAL one year warranty on electronics/six months on everything else15 MILE PLUS range on flatsTIRES10 inch Kenda Hi Performance Slicks UNREAL POWER, torque and speedHIGH/LOW SWITCH . INTERNATIONAL CUSTOMERS ATTENTION! We ship Internationally by Fedex International Economy. Ebay only allows us one shipping cost option for International shipments, every country is different, roughly 275.00 to Western Europe, 350.00 to Australia, etc. If you want us to ship Internationally, contact us first so we can provide you with an accurate shipping cost. We charge exactly what Fedex charges us, based on a 40% corporate discount rate. Check out the A/T video: http://www.youtube.com/watch?v=R6IPwp6AY3g&feature=youtu.be
Feel free to contact us should you have further questions, we are always in the shop M-F 9-5 PST.
One Year Warranty on our European Electronics
E-Glide has been building, servicing, and shipping custom powerboards for over ten years. Our powerboards are built one at a time in our Santa Monica, CA shop.
Our Aluminum A/T has been in production for four years, and is the most powerful electric skateboard offered commercially. This powerboard will go up or over anything! We have guys riding these through Africa, going up hills of snow with chains in Sweden. These are the only powerboards that survive Burning Man. Check out the videos below. ELECTRONICS The enormous power that the AT generates is a result of our European “industrial grade” electronics manufactured for us by PG Drives Technologies, mated to a high output 800 watt, 36 volt motor. The motor controller kicks out 70 amps of power. These are the most powerful and reliable motor controllers (electronics) ever offered on an electric skateboard. They are so reliable they come with a full, non- pro rated, one year warranty. No other electric skateboard offers electronics as powerful, as proven, of this quality, or with this kind of warranty! The result is a powerboard with the fastest acceleration, 0-24 mph in four seconds, highest torque, and highest top speed of any electric skateboard offered today. BRAKING Powerful regenerative braking will stop you quickly.
Stealthy quiet with belt drive, this machine is not for the squeamish. We had to fit a high/low switch on it, and most will never ride it on "high power". ALUMINUM DECK/BATTERY BOX The AT deck is made from .25 inch thick 6061 US made plate aluminum. Each deck is laser cut and perfect concave is added by hydraulic pressing. Edges are radiused. The large fourteen inch wide deck provides a large platform for taller riders to move around on. The unitized effect of the aluminum deck/battery box provides a much “tighter” feel, there is no flex, nor deck “noise” generated. The all aluminum AT will provide you with many years of reliable service. TIRES The AT comes equipped with massive Kenda 10 inch pneumatic slicks. These tires have been used for years on GoPed racing scooters, and provide an amazingly smooth ride and have excellent handling characteristics. They can be used on dirt, gravel, hard packed sand, concrete or asphalt. BATTERIES We now use a special Electric Vehicle battery on all AT’s This is a high output, long life, SLA battery manufactured for us by B & B Battery company. These units, often used in golf carts, will provide an honest 15 mile plus range on flats, and will last for years if maintained. They are the most reliable battery we have experienced in ten years of building powerboards. They are much more reliable than any lithium we have used. CUSTOMER SERVICE Distributed wordwide, we have been building powerboards, full time, for over ten years, and have earned the reputation for being a world leader in electric skateboard design and fabrication. We have a full production shop in Santa Monica, CA. We are ALWAYS open M-F 9-5 PST, and can ALWAYS be reached by phone during business hours. We have the largest electric skateboard parts inventory in the US. Our customer service is legendary. Simplicity of construction combined with the highest quality components make E-Glides the most reliable powerboards offered anywhere today, with the longest warranty. TECHNICAL SPECIFICATIONS 0-24 MPH in five second performance!ALUMINUM DECK 6061 US Made aluminum, .25 inches thick 46.5” length/14.5 “widthWHEEL BASE is 17 inchHEIGHT is 9 inches from ground to top of deckWEIGHT is 75 poundsSTATE OF THE ART "Industrial" grade European electronics, manufactured by PG Drive Technologies, provides and insures the most advanced, trouble free, and reliable electronics of any electric skateboard produced by anyone in the world todaylEXTRA POWERFUL regenerative braking and controlled RPM downhill ridingBATTERIES are 12 volt / 12 amp B & B Battery EB Series (electrical vehicle batteries)UNCONDITIONAL one year warranty on electronics/six months on everything else15 MILE PLUS range on flatsTIRES10 inch Kenda Hi Performance Slicks UNREAL POWER, torque and speedHIGH/LOW SWITCH . INTERNATIONAL CUSTOMERS ATTENTION! We ship Internationally by Fedex International Economy. Ebay only allows us one shipping cost option for International shipments, every country is different, roughly 275.00 to Western Europe, 350.00 to Australia, etc. If you want us to ship Internationally, contact us first so we can provide you with an accurate shipping cost. We charge exactly what Fedex charges us, based on a 40% corporate discount rate. Check out the A/T video: http://www.youtube.com/watch?v=R6IPwp6AY3g&feature=youtu.be